Products
Features Of TVASHTR A LAM-DED SYSTEM
Features Of TVASHTR A LAM-DED SYSTEM
-
5 Axis
Translate motion in X,Y,Z of nozzle with a rotary and Tilt motion of the base -
Argon Recirculation Unit
Less Argon Consumption -
AnteChamber
Loading and unloading of parts without affecting the inert chamber -
FGM / Multi Material
Twin powder feeding system enables printing of two or more material in single or multiple layers. -
MRO:Repair and Restorartion
Repairing worn components typically saves dollars over purchasing new ones -
Cladding/ Coatings
Metal Coatings on parts will increase the efficiency and life of the part
| S. No. | Name of subsystem/ item description | Specification/ Value |
|---|---|---|
| 1. | Laser | Multi Mode Fiber Laser 2000 W Continuous Wave |
| 2. | Beam Diameter | 1-2.5 mm |
| 3. | Powder Feed Rate(316L SS) | 2-20 Gram/Min. |
| 4. | Processing Station Configuration | 5(4+1) axis |
| 5. | Build Volume | 500 x 500 x 300 mm or more |
| 6. | Maximum Job Diameter | 250 mm on Rotary Table |
| 7. | Rotary & Tilting | 360° Continuous & ±110° |
| 8. | Payload on X-Y ,Rotary, Tilt Table(Resp.) | 200,100, 50 Kg |
| 9. | Positional Accuracy | ± 20 µm |
| 10. | Position Repeatability | ± 5 µm |
| 11. | Controller | PLC based (Mitsubishi 80 A) |
| 12. | Material Support | Ni Based Alloys, Fe Based Alloys, Ti Based Alloys, Cu Based Alloys etc. |
| 13. | Pre-processing CAM Software | Mastercam A+ Module |